If you see this message, maybe you need to upgrade your Adobe Flash player plugin to fully enjoy the Dimsport Technology web experience.
Please download it free of charge and without any risk for your system, by clicking here.
DYNO BIKE, power bench tester for motorbikes
Is a computerized diagnostic system for the measurement of the torque and the power performed by a Moto vehicle in running order.
Indispensable to check and analyse the performance parameters for road and competition Motorcycles.
Mechanically designed to suit any loading condition, this dynamometer allows to test motorcycles up to 1 ton. The following measures can be verified simulate and displayed:
- MAXIMUM POWER AT THE WHEEL AND RELATED GRAPHIC REPRESENTATION
- MAXIMUM POWER AT THE ENGINE AND RELATED GRAPHIC REPRESENTATION
- TORQUE TO THE WHEEL AND ENGINE AND TREND CHART
- SIMULATION AT CONSTANT RPM
- SIMULATION AT CONSTANT SPEED
The parameters are measured and corrected through a barometric station integrated in application of the normalization of the curves: DIN 70020, EWG 80/1269, ISO 1585, j1349 SAE, JIS d101001.
DynoBike power test bench is also equipped with a range of sensor and probe for the acquisition data of analog parameters such as ambient pressure and temperature, engine oil/water temperature, exhaust gas temperature, acquisition revolution engine through inductive caliper, oxygen rate (lambda).
The software offers a variety of options to customise the parameters displayed. It allows to elaborate your tests and draw up the results in several, clear reports.
The tests can be saved in a logical structure, and the most significant can be overlapped for comparative purposes, to verify and prove the competence of your professional skills. A special option allows multiple sessions up to eight test.
Reassuring the preservation of the personal integrity as its main goal, the safety equipment allows maximum freedom in its use, to make operations easier.
TECHNICAL DATA
| Maximum power per axis | 295 Hp |
| Maximum speed | 223 M/h |
| Maximum torque per axis | 442 lbft |
| Diameter of the roller | 15.75 in |
| Wheel base | 48/82 in |
| PORTATA | 2200 lb |
| Variable speed of the fan | Yes (OPT) |
| Electrical power absorbed | 2.9 Hp |
FAN DATA
| Electrical power | 7.4 Hp |
| Power supply voltage | 230/400 Vac 3PH |
| Air speed | 124 M/h |
| Average air pressure | 6.000 Psi |
| Air flow rate | 56.500 ft³/h |
| Dimension | 780 * 465 * 895 mm |
| Weight | 140 Kg |
DATA ACQUISITION
| Oil temperature sensor | 0 - 300 ºF |
| K temperature sensor | 0 - 1.830 ºF |
| Inductive r.p.m. clamp. | 0 - 20.000 |
| Lambda probe | 0 - 1 Vcc / 0 - 5Vcc |
