DYNO RACE, rolling road dynamometer for power and road simulation

Is a computerized diagnostic system for the measurement of the torque and the power performed by a vehicle in running order. Indispensable to check and analyse the performance parameters of two or four-wheel drive cars & light vehicle (also electronically controlled). Mechanically designed to suit any loading condition, this dynamometer allows to test vehicles up to 2, 5 ton. per axis, The following measures can be verified simulate and displayed:

• MAXIMUM POWER AT THE WHEEL AND RELATED GRAPHIC REPRESENTATION
• TORQUE TO THE WHEEL AND ENGINE AND TREND CHART
• SIMULATION AT CONSTANT RPM
• SIMULATION AT CONSTANT SPEED
• SIMULATION AT CONSTANT SPEED
• SIMULATION ON CONSTANT TRACTION
• MESURE OF THE DISCREPANCY OF SPEEDOMETER
• ROAD SIMULATION

The parameters are measured and corrected through a barometric station integrated in application of the normalization of the curves: DIN 70020, EWG 80/1269, ISO 1585, j1349 SAE, JIS d101001.

Dynorace power test bench is also equipped with a range of sensor and probe for the acquisition data of analog parameters such as pressure manifold, ambient pressure and temperature, engine oil temperature, exhaust gas temperature, acquisition revolution engine through inductive caliper, oxygen rate (lambda) eventual data digital acquisition through OBDII connection (optional).

The software offers a variety of options to customise the parameters displayed. It allows to elaborate your tests and draw up the results in several, clear reports. The tests can be saved in a logical structure, and the most significant can be overlapped for comparative purposes, to verify and prove the competence of your professional skills. A special option allows multiple sessions up to eight test.

Reassuring the preservation of the personal integrity as its main goal, the safety equipment allows maximum freedom in its use thanks to an active control on all parts of the dynamometer, as example when handling and varying the wheelbase setting (4WD version) or when locking the rollers and lifting the metal bar in order to move a vehicle in/out, to make operations easier.

TECHNICAL DATA

Maximum power per axis	402 Hp
Maximum speed	185 mph
Maximum torque per axis	100 Ft.lb
Traction force per axis	510 Ft.lb
Diameter of the roller	12,52 in
Wheel base	6,5 ~ 9,8 ft.
Track	2,9 ~ 6,8 ft.
Mechanical connection of the axes	YES (OPT)
Variable speed of the fan	YES (OPT)
Locking roller and lift and	YES
Electrical power absorbed	400 Vca 50/60 Hz

FAN DATA

Electrical power	4Kw
Power supply voltage	50/60 Hz
Air speed	56 mph
Average air pressure	125 lb.ft²
Air flow rate	39.000 ft³ * h
Dimension	46 * 37,8 * 31,5 in
Weight	363 lb

DATA ACQUISITION

Oil temperature sensor	0 - 300 ºF
K temperature sensor	0 - 1.830 ºF
Manifold pressure sensor	-14,5+23,2 lb.in²
Inductive r.p.m. clamp.	0 - 20.000
Lambda probe	0 - 1 Vcc / 0 - 5Vcc