If you see this message, maybe you need to upgrade your Adobe Flash player plugin to fully enjoy the Dimsport Technology web experience.
Please download it free of charge and without any risk for your system, by clicking here.
TRASDATA
Trasdata, the evolution of the BDM ecu reading/programming tool in bdm mode
TRASDATA BDM tool, an upgrade of the previously released 555 PRO,
is an independent BDM system allowing reading and programming operations
of the software stored in ECUs supplied
with the following microprocessors (CPU):
- Motorola MPC 5xx;
- Infineon Tricore;
- ST Microelectronics ST10.
New microprocessors will be implemented in the near future to allow our clients tuning interventions on a wider range of vehicles.
The BDM reading and programming operations can be considered an alternative solution to the serial programming method and an evolution of the old conventional programming procedure: this system requires the opening of the ECU and the connection to a specific area (empty).
A specific metal positioning frame allows the tuner to avoid soldering and operations on the ECU board: specific boards created according to the ECU type are supplied to connect some metal pins to the specific area identified by our engineers for the reading and programming operations.
TRASDATA BDM tool permits reading and programming operations of the complete ECU software:
- EPROM or ROM memory;
- Microcontroller (CPU)
- Serial EEPROM.
After the initial reading of the ECU software, it is always possible to retrieve the original content even in the case of the ECU blocking, (as example after a wrong checksum recalculation).
